1.04lb. – REPARAMOS TU COMPU

2014-16 Impala Engine computer 12653998 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2014-16 2.4/2.5/3.6L Chevrolet Impala. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12653998 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline*** If you would like the module to be truly “Plug & Play” Where no relearn procedures will need to be done and all maintenance reminders will retain their data, we offer that too. You will need to mail to us the original computer from your vehicle so that we can retrieve the data from your ECM and use that to make a “clone” replacement computer. For this to be an option your computer must be able to communicate so that the data can be transferred. To purchase this service you will need to type this number into the Ebay search bar 185734198486 and hit “enter” so that you will be transferred to that listing. You will then need to make your purchase from that listing.

2013-16 Verano Engine computer 12653998 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2013-16 2.0/2.4L Buick Verano. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12653998 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline*** If you would like the module to be truly “Plug & Play” Where no relearn procedures will need to be done and all maintenance reminders will retain their data, we offer that too. You will need to mail to us the original computer from your vehicle so that we can retrieve the data from your ECM and use that to make a “clone” replacement computer. For this to be an option your computer must be able to communicate so that the data can be transferred. To purchase this service you will need to type this number into the Ebay search bar 185734198486 and hit “enter” so that you will be transferred to that listing. You will then need to make your purchase from that listing.

“Virgin” Service number 12653998 GM Engine computer

This listing is for one “Virginized” used engine computer Service number 12653998. We clear the data from the donor vehicle and restore the computer so it is a duplicate of a new computer. “It is ready for programming” The computer will not be programmed for your vehicle. If you need that service see our other listings for that. This is for programmers seeking a lower cost option versus buying a new computer. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. The computer has a one year warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any relatedtrouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear therelated trouble code. The vehicle will run normal but the ”service engine soon” light may come on and atrouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered before 2:00 P.M. EST (Mon-Fri) If you would like the module to be truly “Plug & Play” Where no relearn procedures will need to be done and all maintenance reminders will retain their data, we offer that too. You will need to mail to us the original computer from your vehicle so that we can retrieve the data from your ECM and use that to make a “clone” replacement computer. For this to be an option your computer must be able to communicate so that the data can be transferred. To purchase this service you will need to type this number into the Ebay search bar 185734198486 and hit “enter” so that you will be transferred to that listing. You will then need to make your purchase from that listing.

2016 Regal Engine computer 12653998 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2016 2.0/2.4L Buick Regal. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12653998 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline*** If you would like the module to be truly “Plug & Play” Where no relearn procedures will need to be done and all maintenance reminders will retain their data, we offer that too. You will need to mail to us the original computer from your vehicle so that we can retrieve the data from your ECM and use that to make a “clone” replacement computer. For this to be an option your computer must be able to communicate so that the data can be transferred. To purchase this service you will need to type this number into the Ebay search bar 185734198486 and hit “enter” so that you will be transferred to that listing. You will then need to make your purchase from that listing.

2014 Chevrolet Equinox 2.4L 12657781 ECU ECM PCM Computer Programmed E39A

Plug & PlayQuick Processing Nations Leader in Remanufacturing and Programming Automotive Computers. Lifetime WarrantyNote: Please check vehicle compatibility section to be sure your vehicle is listed and Confirm your Service# matches listing.2014 Chevrolet Equinox 2.4L 12657781 ECU ECM PCM Computer Programmed E39AFAST & FREE SHIPPINGHow to orderMOSTIMPORTANT Confirm the listing matches your vehicle Year, Make and Model and click “Buy it Now” to complete payment.Include your VIN, ECU- Service#, Phone# and a brief description of your vehicle issues during checkout.ECU will arrive programmed and ready for install, be sure to follow the Key relearn emailed to you or follow video below.LIFETIME WARRANTY CORE REQUIRED This listing is for 1 Engine Computer replacement as listed. This unit is 100% remanufactured, tested and functional and will be “Plug and Play”. Failure to follow proper diagnoses and troubleshooting can and will DAMAGE this unit resulting in Loss of Warranty You will need to perform a simple step by step Key Relearn procedure on the vehicle once you receive the new ECU from us and in some cases a 'Crankshaft Relearn'. This can be done with any scantool. Instructions and procedures will be emailed to you after purchase. (not through eBay, we will use the email associated with your PayPal account) or see the videos posted here. About Us All Computer Resources is a team of highly trained I.T. Professionals & Engineers in South Florida. We have 15 years of industry experience providing excellent services to a wide scope of companies. At ACR we strive for 100% Customer Satisfaction. We only use top of the line Hardware and Software for all of your needs. We do this to ensure the minimal downtime, because we care about making your experience as pain-free as possible. We will not rest until our clients are satisfied.Happy to help.ShippingPaymentReturnsContactWarrantyShippingPaymentReturnsContactWarranty We currently offer multiple shipping services within the 48 Contiguous States: Free- Sure/Smart Post- (Slowest)$12 -UPS Ground$35 -UPS 2-Day Air$55- UPS Next Day Air Expedited shipping services DO NOT expedite the processing time, only the shipping time. If you are in need of the product quickly we suggest using option 2-4 for enhanced arrival times. Processing time is usually 24-72 Business Hours (Monday-Friday). The processing begins once we have your cleared payment and all the required information outlined above. Once the part has shipped, you will receive an email to the address on file which will include your Tracking#. Please allow extra shipping time and additional surcharge for Hawaii, Virgin Islands, Puerto Rico and Alaska. Canadian orders are shipped via USPS Priority at a flat rate. Immediate payment is required for the sale of this product.We accept payment by PayPal during checkout.We also accept Visa, MasterCard, Discover and Amex.Please contact us directly at (786) 879-7566 Items are eligible for returns within 14 days from delivery date. Item must be in original condition and fully functional. A 20% restocking fee applies to electronic modules and all actual shipping charges are deducted. ($12.50 for free shipping). If you choose to use the return label provided there will be an additional deduction of $12.50. We are committed to Customer Satisfaction. If at any time you are not satisfied with the service or merchandise you received, please allow us the opportunity to rectify your concerns and earn your positive feedback and business. You may contact us directly at (786) 879-7566. Thank you for your businessAll Computer Resources, Inc.205 N. Flagler Ave.Homestead FL. 33030 Toll Free: 1-866-699-5230Main Line: (786) 879-7566 Business Hours:9:00AM – 7:00PM ESTMonday – FridayAll Computer Resources, Inc. has been in business since 2008 and has since sold over 360,000 Auto Computers. We are the leader in fully rebuilt and programmed modules now offering our products to the general public. We stand behind our product 100%. We offer a standard Lifetime warranty on all computers purchased through this site. Most listings require your core to be returned to activate said warranty within 14 days whereas a return label will be provided (All Diesel vehicles require core to be returned). Failure to return the core will result in loss of warranty and a Core Charge of $100 for gas and $200 for diesel. This warranty does not cover parts that fail due to abuse, misuse, neglect, alteration, impact, water damage or accident. We assume no liability for labor, diagnostics, mechanic fees, towing bills, rental car charges, lodging or any other direct or consequential damages resulting from this transaction. All Computer Resources, Inc. reserves the right to deny warranty coverage for damaged parts. Please see our tech talk bulletins for proper installation and diagnostics. Automotive modules can be damaged by various electrical faults during and after installation which will not be covered. All units are fully tested for functionality prior to shipment. Your acceptance of this part constitutes acceptance of all of the aforementioned terms. 'Reman' is a registered Trademark of All Computer Resources, Inc.All rights reserved. Copyright 2015 2014 Chevrolet Equinox 2.4L 12657781 ECU ECM PCM Computer VATS DELETE E39A Plug & PlayLifetime WarrantyQuick Processing Nations Leader in Remanufacturing and Programming Automotive Computers. Note: Please check vehicle compatibility section to be sure your vehicle is listed and Confirm your Service# matches listing.2014 Chevrolet Equinox 2.4L 12657781 ECU ECM PCM Computer Programmed E39AFAST & FREE SHIPPINGHow to orderConfirm the listing matches your vehicle Year, Make and Model and click “Buy it Now” to complete payment. MOSTIMPORTANTInclude your VIN, ECU- Service#, Phone# and a brief description of your vehicle issues during checkout.ECU will arrive programmed and ready for install, be sure to follow the Key relearn emailed to you or follow video below.LIFETIME WARRANTY CORE REQUIRED This listing is for 1 Engine Computer replacement as listed. This unit is 100% remanufactured, tested and functional and will be “Plug and Play”. Failure to follow proper diagnoses and troubleshooting can and will DAMAGE this unit resulting in Loss of Warranty You will need to perform a simple step by step Key Relearn procedure on the vehicle once you receive the new ECU from us and in some cases a 'Crankshaft Relearn'. This can be done with any scantool. Instructions and procedures will be emailed to you after purchase. (not through eBay, we will use the email associated with your PayPal account) or see the videos posted here. About Us All Computer Resources is a team of highly trained I.T. Professionals & Engineers in South Florida. We have 15 years of industry experience providing excellent services to a wide scope of companies. At ACR we strive for 100% Customer Satisfaction. We only use top of the line Hardware and Software for all of your needs. We do this to ensure the minimal downtime, because we care about making your experience as pain-free as possible. We will not rest until our clients are satisfied.Shipping We currently offer multiple shipping services within the 48 Contiguous States: Free- Sure/Smart Post- (Slowest)$12 -UPS Ground$35 -UPS 2-Day Air$55- UPS Next Day Air Expedited shipping services DO NOT expedite the processing time, only the shipping time. If you are in need of the product quickly we suggest using option 2-4 for enhanced arrival times. Processing time is usually 24-72 Business Hours (Monday-Friday). The processing begins once we have your cleared payment and all the required information outlined above. Once the part has shipped, you will receive an email to the address on file which will include your Tracking#. Please allow extra shipping time and additional surcharge for Hawaii, Virgin Islands, Puerto Rico and Alaska. Canadian orders are shipped via USPS Priority at a flat rate. PaymentImmediate payment is required for the sale of this product.We accept payment by PayPal during checkout.We also accept Visa, MasterCard, Discover and Amex.Please contact us directly at (786) 879-7566Returns Items are eligible for returns within 14 days from delivery date. Item must be in original condition and fully functional. A 20% restocking fee applies to electronic modules and all actual shipping charges are deducted. ($12.50 for free shipping). If you choose to use the return label provided there will be an additional deduction of $12.50. We are committed to Customer Satisfaction. If at any time you are not satisfied with the service or merchandise you received, please allow us the opportunity to rectify your concerns and earn your positive feedback and business. You may contact us directly at (786) 879-7566. Thank you for your businessContactAll Computer Resources, Inc.205 N. Flagler Ave.Homestead FL. 33030 Toll Free: 1-866-699-5230Main Line: (786) 879-7566 Business Hours:9:00AM – 7:00PM ESTMonday – FridayWarrantyAll Computer Resources, Inc. has been in business since 2008 and has since sold over 360,000 Auto Computers. We are the leader in fully rebuilt and programmed modules now offering our products to the general public. We stand behind our product 100%. We offer a standard Lifetime warranty on all computers purchased through this site. Most listings require your core to be returned to activate said warranty within 14 days whereas a return label will be provided (All Diesel vehicles require core to be returned). Failure to return the core will result in loss of warranty and a Core Charge of $100 for gas and $200 for diesel. This warranty does not cover parts that fail due to abuse, misuse, neglect, alteration, impact, water damage or accident. We assume no liability for labor, diagnostics, mechanic fees, towing bills, rental car charges, lodging or any other direct or consequential damages resulting from this transaction. All Computer Resources, Inc. reserves the right to deny warranty coverage for damaged parts. Please see our tech talk bulletins for proper installation and diagnostics. Automotive modules can be damaged by various electrical faults during and after installation which will not be covered. All units are fully tested for functionality prior to shipment. Your acceptance of this part constitutes acceptance of all of the aforementioned terms. 2014 Chevrolet Equinox 2.4L 12657781 ECU ECM PCM Computer VATS DELETE E39A

2013 Buick Enclave 3.6L 12657781 ECU ECM PCM Computer VATS DELETE E39A

2013-16 XTS Engine computer 12653998 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2013-16 3.6L Cadillac XTS (Excludes V-Sport). It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12653998 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline*** If you would like the module to be truly “Plug & Play” Where no relearn procedures will need to be done and all maintenance reminders will retain their data, we offer that too. You will need to mail to us the original computer from your vehicle so that we can retrieve the data from your ECM and use that to make a “clone” replacement computer. For this to be an option your computer must be able to communicate so that the data can be transferred. To purchase this service you will need to type this number into the Ebay search bar 185734198486 and hit “enter” so that you will be transferred to that listing. You will then need to make your purchase from that listing.

GM Programming Service

This listing is a generic listing for when an opportunity for some type of Programming or Service need to be done on a GM Engine Computer. The matter needs to be discussed with us first. This listing is reactivated when the situation arises. Non-refundable/No warranty.

“NEW” 2013-16 GM Engine computer 12653998 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits 2014-16 GM vehicles with service number 12653998. See list above for compatibility. This auction is for one service number 12653998 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is brand new. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline***

2013-16 Enclave Engine computer 12653998 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2013-16 3.6L Buick Enclave. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12653998 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline*** If you would like the module to be truly “Plug & Play” Where no relearn procedures will need to be done and all maintenance reminders will retain their data, we offer that too. You will need to mail to us the original computer from your vehicle so that we can retrieve the data from your ECM and use that to make a “clone” replacement computer. For this to be an option your computer must be able to communicate so that the data can be transferred. To purchase this service you will need to type this number into the Ebay search bar 185734198486 and hit “enter” so that you will be transferred to that listing. You will then need to make your purchase from that listing.