2008-09 Equinox 3.4L Computer 12612384 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following: 2008-09 3.4L Chevrolet Equinox. This auction is for one service number 12612384 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. We will include instructions for the 30 minute security password relearn procedure which will need to be done before the vehicle will start. This is a “do it yourself” procedure that requires either a battery charger be connected to the vehicle or jumper cables be connected to another vehicle that should be left running the whole time. On some vehicles this procedure may not work, if that is the case refer to the paragraph below. ****This computer may require a theft deterrent relearn that must be performed with a programming scan tool through an online subscription with A.C.DelcoTDS before it will start the vehicle. A dealer or properly equipped repair shop can do this (charges will vary).**** A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon-Fri)

1999 2000 Silverado Engine computer 09354896 “Programmed to your VIN” ECM PCM

This E.C.M. fits the following:1999-2000 4.8/5.3/6.0L Chevrolet Silverado. This auction is for one service number 09354896 ECM (Engine control module) that is programmed for your vehicle using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. Two things may have to be done after you install your E.C.M. First an anti-theft relearn may have to be performed. If this is the case the truck will not start. The second thing is that a crankshaft variation relearn may need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P1336). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. Instructions for both procedures will be included. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon. – Fri.)

2002 Silverado 2500 Engine computer 12200411 “Programmed to your VIN” PCM ECM

This E.C.M. fits the following: 2002 6.0/8.1L Silverado 2500/2500HD. This auction is for one service number 12200411 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N. so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. Two things may have to be done after you install your E.C.M. First an anti-theft relearn may have to be performed. If this is the case the truck will not start. The second thing is that a crankshaft variation relearn may need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P1336). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. Instructions for both procedures will be included. We will ship within one business day of payment. Same day shipping if ordered by 2:00 EST (Mon. – Fri.)

2008 Avalanche Engine computer 12612384 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2008 5.3/6.0L Chevrolet Avalanche. This auction is for one service number 12612384 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. We will include instructions for the 30 minute security password relearn procedure which will need to be done before the vehicle will start. This is a “do it yourself” procedure that requires either a battery charger be connected to the vehicle or jumper cables be connected to another vehicle that should be left running the whole time. On some vehicles this procedure may not work, if that is the case refer to the paragraph below. ****This computer may require a theft deterrent relearn that must be performed with a programming scan tool through an online subscription with A.C.DelcoTDS before it will start the vehicle. A dealer or properly equipped repair shop can do this (charges will vary).**** A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered before 2:00 P.M. EST (Mon-Fri)

2007 Cobalt 2.2L Engine Computer 12597125 “Programmed to your VIN” ECM PCM

This E.C.M. fits the following vehicles: 2007 2.2L Chevrolet Cobalt. This auction is for one service number 12597125 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using you V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. A 30 minute security relearn procedure will need to be done before the car will start with the replacement computer. This requires no tools except that a battery charger or jumper cables from another vehicle should be on the car because the key will be on for 30+ minutes. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. Specific instructions for both these procedures will be sent with the computer. We will ship within one business day of payment. You can pay instantly with PayPal. We use Alldatapro for our repair information. If you need diagnostic information please let us know and we can help. We are also a member of IATN (International automotive technicians network) a valuable resource of auto repair information. If you want to speak to us in person call the shop at 513-648-0444 (Monday-Friday 10:00-5:00 E.S.T.) ***Some other sellers of computers do not disclose that these procedures must be done until you have bought the product—others claim that their units are 100% plug and play. To be 100% plug and play they would have to alter the function of the computers original design and you might lose your antitheft protection and the ability to detect engine misfires. The proper way to replace an engine computer and be sure your vehicle remains in it’s original condition is to do both the antitheft relearn and crankshaft variation relearn if applicable.*** Same day shipping if ordered before 3:00 P.M. EST (Mon. – Fri.) We do not use or access ACDelcoTDS.com to program this computer.

1997 1998 1999 2000 Sonoma Engine computer 16228016 Programmed to your VIN”

This E.C.M. fits the following vehicles: 1997-2000 2.2L GMC Sonoma. This listing is for one service number 16228016 ECM (Engine control module) that is programmed for your vehicle using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. Two things may have to be done after you install your E.C.M. First an anti-theft relearn may have to be performed. If this is the case the vehicle will not start. The second thing is that a crankshaft variation relearn may need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P1336). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. Instructions for both procedures will be included. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon. – Fri.) Flashmasters ECM does not use ACDelco Technical Delivery System (TDS) services for any module services. ACDelco is an automotive parts brand owned by General Motors Company.

2006 Cobalt Engine Computer 12599714 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2006 2.2L Chevrolet Cobalt. This auction is for one service number 12599714 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. A 30 minute security relearn procedure will need to be done before the car will start with the replacement computer. This requires no tools except that a battery charger or jumper cables from another vehicle should be on the car because the key will be on for 30+ minutes. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. Specific instructions for both these procedures will be sent with the computer. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon. – Fri.)

2007 Silverado Engine computer 12597121 “Programmed to your VIN” ECM PCM ECU

****This computer may require a theft deterrent relearn that must be performed with a programming scan tool through an online subscription with A.C.DelcoTDS before it will start the vehicle. A dealer or properly equipped repair shop can do this (charges will vary)**** This E.C.M. fits the following vehicles: 2007 4.8/5.3/6.0/6.2L Chevrolet Silverado (1500, 2500HD, 3500HD) This auction is for one service number 12597121 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light will come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered before 2:00 EST (Mon. – Fri.)