Item Tag: LINK ENGINE MANAGEMENT

NEW LINK ECU CANJST4 CAN Connection Cable for G4X S2000 ECU 101-0198

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector). Plugs directly into the socket on the ECU PCB, provides CAN and a protected 12V supply to allow easy connection of CAN accessories. Compatible PlugIns:233-4000 – PlugIn ECU G4X Honda S2000 AP1 Suitable for connecting and powering a CAN LAMBDA, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of <3A. SpecsDTM4 Male to JST4. 12V and GND Terminated to JST4. Length 300mm Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK CAN Lambda with wideband AFR sensor with CANJST Cable CANLAM

Accurately monitor your air/fuel ratio with the LINK CAN Lambda. This allows LINK to see accurate air fuel ratio with clean fast readings over CAN bus. CANJST Cable included, used to add CAN communications to G4+/G4X Plugins which have a 5 Pin CAN connector. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other Link CAN accessories including the CAN Extension cable (CANEXT) and CAN Splitter Cable (CANTEE) INCLUDED:* LINK CAN Lambda Box* Wideband O2 Sensor * CANJST Cable to connect to G4+/G4X ECUs except list below. Not compatible with the below: (these require a CANJST4 Cable):233-4000 Honda S2000 AP1228-4000 Subaru WRX V5-6237-4000 Honda HC20X Type-R DC5/RSX238-4000 Subaru WRX11239-4000 MX5NB2X240-4000 MX5NB1X Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK ECU CANEXT – Link CAN Extension Cable 2m 6.5′ 101-0214

LINK CANEXT CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitters or CAN devices. DTM4 Female to DTM4 Male. Includes CAN and Power Wiring. Length: 2 meters (6.5 feet) DTM4 Pin Out Pin 4: CAN H Pin 3: CAN L Pin 2: Ground Pin 1: 12V Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK ECU CANTEE – Link CAN Splitter Cable 101-0212

LINK CANTEE CAN Splitter Cable for connecting an additional CAN device. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs: DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring. Loom 1 Length 80mm Loom 2 Length 120mm Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK ECU XS Expansion IO Cable for G4X G4+ XSL 101-0106

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent on the Plugin ECU. Please check your ECU instructions to find out exact specifics. Common applications include but are not limited to:Boost adjustment knob or switchWide-band AFR/LambdaOil Pressure SensorFuel Pressure SensorInlet Air Temperature (IAT) sensorMap switch (Different tunes available via toggle switch) The XS Loom is 2.5m long and uses 20AWG wire. Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK ECU CANJST CAN Connection Cable for G4X Plug&Play ECUs 101-0197

LINK CANJST is used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector. Plugs directly into the CAN socket on the ECU. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other Link CAN accessories including the CAN Lambda Not compatible with the below PlugIns (these require a CANJST4 Cable):233-4000 – PlugIn ECU G4X Honda S2000 AP1 Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK ECU USB Cable for G4X G4+ CUSB 101-0001

Used for tuning all Link G4 / G4+ / G4X ECU’s (except the G4+ Atom , G4X AtomX, G4+ Monsoon and G4X MonsoonX as they use a Micro USB to USB cable) I accidentally bought but don’t need. New, unused, still in package.

NEW LINK ECU USB Cable for G4X G4+ CUSB 101-0001

Link CAN to USB Cable. Used to connect the LINK computers (see below) to a PC via USB. 62″ end to end Compatible with:Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+ XtremeLink G4+ Thunder All Link G4+ and G4X Plugin ECUsLink G4+ Storm Black/Blue/Silver Any older Link utilizing the Link 6 Pin CAN connectorVipec V88 and i44Link G3 Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY

NEW LINK ECU CANLTW CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN)

Required to add CAN communication to Wire-In ECU’s which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU. Compatible ECU’s:G4X/G4+ Xtreme (CAN1)G4X/G4+ Fury (CAN1)G4+ Force (CAN1)G4+ Thunder (CAN1) Specs: DTM4 Male to LTW 6 pin. 12V & GND Flying Leads. CAN Loom Length 300mm (Flying lead length 500mm) DTM4 Pin Out:Pin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V Pictures are of actual product. IN STOCK and ready to SHIP SAME DAY