Item Tag: Direct Replacement

2010-14 Tahoe Engine computer 12633238 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2010-14 5.3/6.2L Chevrolet Tahoe. This auction is for one service number 12633238 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered by 2:00 EST (Mon-Fri)

2012 Impala Engine computer 12643248 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2012-16 2.5/3.6L Chevrolet Impala. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12643248 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline***

2012 Acadia Engine computer 12643248 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2012 3.6L GMC Acadia. This auction is for one service number 12643248 ECM (Engine control module) that is programmed for your vehicle using thelatest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline***

Various GM 1996 LT1 Engine Computer ECM PCM 16214399 Programmed to your VIN

******If this is not the computer you are looking for please visit our e-bay store for more pcm’s. This listing is for one 16214399 PCM (also known as Engine Computer, Powertrain Control Module, ECM, ECU, and VCM) that will arrive at your door with matching calibration programmed to your specific vehicle VIN. This PCM will fit the following applications: 1996 BUICK ROADMASTER COLLECTORS EDITION 5.7L ENGINE1996 BUICK ROADMASTER COLLECTORS EDITION LIMITED 5.7L ENGINE1996 BUICK ROADMASTER ESTATE WAGON COLLECTORS EDITION 5.7L ENGINE 1996 CADILLAC FLEETWOOD 5.7L ENGINE1996 CADILLAC FLEETWOOD BROUGHAM 5.7L ENGINE 1996 CHEVROLET CAMARO Z28 5.7L ENGINE 1996 CHEVROLET CAPRICE CLASSIC 5.7L ENGINE1996 CHEVROLET CAPRICE CLASSIC WAGON 5.7L ENGINE1996 CHEVROLET CAPRICE CLASSIC 4.3L ENGINE1996 CHEVROLET CAPRICE CLASSIC WAGON 4.3L ENGINE 1996 CHEVROLET CORVETTE 5.7L ENGINE1996 CHEVROLET CORVETTE GRAND SPORT 5.7L ENGINE1996 CHEVROLET CORVETTE COLLECTORS EDITION 5.7L ENGINE 1996 CHEVROLET IMPALA SS 5.7L ENGINE 1996 PONTIAC FIREBIRD FORMULA 5.7L ENGINE1996 PONTIAC FIREBIRD TRANS AM 5.7L ENGINE *****GM used the same computer for both the automatic and manual transmission applications but with different programming. When we program the computer to your 17 digit VIN (vehicle identification number) it will be programmed to match the transmission type for your application. *Programmed to your specific vehicle*Free shipping *1 YEAR Replacement Guarantee – no hassle*No core charge –you keep your existing PCM- no extra trips to the post office*We ship the same day or the following business day from receipt of payment and your 17 digit VIN (vehicle identification number) – item is in stock and ready to ship. *************** You can send us your 17 digit VIN (vehicle identification number) at the time of payment in the “note to seller” or you can send it after your purchase and payment by contacting us through the ebay message system. *****GM installed this 16214399 PCM in the above all application. This was possible because each of these models received their specific programming from the factory. In other words, you can’t simply swap a used PCM from one vehicle to the next. We are a licensed user of the same software that your local dealer would use to program and update your computer. With your purchase, we will program the PCM to your VIN (vehicle identification number) with the latest software updates available from GM. ******This PCM is used and was removed from a running salvaged vehicle. This PCM comes with a 1-year replacement guarantee. We have been in the PCM business for 19+ years. We are also a 19+ year eBay member with an Excellent positive feedback score. *Picture is of a 16214399 PCM in stock. The PCM that you purchase will be of like quality and finish as that shown. Other info: Why buy your spare PCM from us? You will be purchasing a high quality used PCM. You get free Flash programming. This type of computer has “chip” embedded into the PCM and it is not removable. The calibration file per the application is “Flashed,” or reprogrammed using a software package and a pass through device. The “chip” is no longer removed for programming. Proper programming is essential when replacing a PCM whether it is a used PCM or a remanufactured PCM. A used GM computer will have the software installed that pertains to the original vehicle that it was removed from. In some cases, GM computers with the same part number will interchange with many different vehicles including those with different engine and transmission configurations. However, unless the computer is programmed with the correct software it won’t function properly upon installation. We will flash program the computer purchased from us with your specific VIN number for the latest updated calibrations available for a stock calibration. This is important to ensure specific vehicle programming and to guarantee flawless performance in your vehicle. At the end of the auction you will need to provide us with your VIN (Vehicle Identification Number). ******View our e-bay store for more pcm’s.

Canyon 2005 05 GMC Engine Computer ECM PCM 12569773 – Programmed to your VIN #

This auction is for one 12569773 PCM (also known as Engine Computer, Powertrain Control Module, ECM, ECU, and VCM) that will arrive at your door ready to install with the proper calibration programmed to your specific vehicle. This PCM will fit the following applications: 2005 GMC CANYON 3.5L AUTOMATIC 4WD ( 4X4 ) 2005 GMC CANYON 3.5L MANUAL TRANS 4WD ( 4X4 ) 2005 GMC CANYON 3.5L AUTOMATIC 2WD ( 4X2 ) 2005 GMC CANYON 3.5L MANUAL TRANS 2WD ( 4X2 ) 2005 GMC CANYON 2.8L AUTOMATIC 4WD ( 4X4 ) 2005 GMC CANYON 2.8L MANUAL TRANS 4WD ( 4X4 ) 2005 GMC CANYON 2.8L AUTOMATIC 2WD ( 4X2 ) 2005 GMC CANYON 2.8L MANUAL TRANS 2WD ( 4X2 ) *GM used the same computer for the 2.8L 2wd and 4wd automatic and manual transmission applications as it did for the 3.5L 2wd and 4wd automatic and manual transmisson applications. The difference between all of them is the programming in the computer to make them fit the correct application. With your purchase we will program the computer to your 17 digit VIN for an exact vehicle match so that the computer is ready to install when you receive it. ******If this is not the computer you are looking for please visit our e-bay store for more pcm’s. *Programmed to your specific vehicle *Shipped to your door ready to install *1 YEAR Replacement Guarantee – no hassle *No core charge –you keep your existing PCM- no extra trips to the post office *We ship the same day or the following business day from receipt of payment and your 17 digit VIN – item is in stock ************** You can send us your 17 digit VIN (vehicle identification number) at the time of payment in the “note to seller” or you can send it after your purchase and payment by contacting us through the ebay message system. ******GM installed this 12569773 PCM in all of the above applications. This was possible because each of these models received their specific programming from the factory. In other words, you can’t simply swap a used PCM from one vehicle to the next. We are a licensed user of the same software that your local dealer would use to program and update your computer. With your purchase, we will program the PCM to your VIN (vehicle identification number) with the latest software updates available from GM. ******This PCM is used and was removed from a running salvaged vehicle. This PCM comes with a 1-year replacement guarantee. We have been in the PCM business for 17+ years. We are also a 17+ year eBay member with an Excellent positive feedback score. Other info: Why buy your spare PCM from us? You will be purchasing a high quality used PCM. You get free Flash programming with every OBDII GM computer purchased. OBDII type computers have the “chip” imbedded into the PCM and it is not removable. The calibration file per the application is “Flashed,” or reprogrammed using a software package and a pass through device. The “chip” is no longer removed for programming. Proper programming is essential when replacing a PCM whether it is a used PCM or a remanufactured PCM. A used GM computer will have the software installed that pertains to the original vehicle that it was removed from. In some cases, GM OBDII type computers will interchange with many different vehicles including those with different engine and transmission configurations. However, unless the computer is programmed with the correct software it won’t function properly upon installation. We will flash program the computer purchased from us with your specific VIN number for the latest updated calibrations available for a stock calibration. This is important to ensure specific vehicle programming and to guarantee flawless performance in your vehicle. At the end of the auction you will need to provide us with your VIN (Vehicle Identification Number). THIS COMPUTER IS ALSO A DIRECT INTERCHANGE FOR THE FOLLOWING SERVICE NUMBER 12597521 ******View our e-bay store for more pcm’s. After purchasing, pay instantly with your credit card through PayPal!

2012 Camaro Engine computer 12643248 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2012 3.6L Chevrolet Camaro. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12643248 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline***

2013 Impala Engine computer 12651994 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following vehicles: 2012-16 2.5/3.6L Chevrolet Impala. It will also fit the vehicles listed in the compatibility chart. This auction is for one service number 12651994 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle is running. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping as long as the order is made by 2:00 P.M. EST (Mon-Fri). ***If your vehicle is a flex fuel vehicle and there is any amount of E85 in the gas tank you will need to drain the tank and flush the lines first so that the new ECM can calibrate with gasoline***

2009 Silverado Engine computer 12625455 “Programmed to your VIN” ECM PCM ECU

This E.C.M. fits the following: 2009 4.8/5.3/6.0/6.2L Chevrolet Silverado. This auction is for one service number 12625455 ECM (Engine control module) that is programmed for your vehicle using the latest software updates using your V.I.N. (Vehicle identification number) to exactly match your vehicle. After you purchase the E.C.M. you will need to provide us with your V.I.N so that we can program the E.C.M. before we ship it to you. This computer is refurbished and tested for functionality. There is no core charge you keep your old E.C.M. There is a one year replacement warranty. The vehicle may or may not start once the computer is installed. If the vehicle does not start an antitheft password relearn procedure will have to be done. Also, the vehicle may run for a period of time (weeks or months) and then will not start and may set a code P0633. If this occurs the following procedure will have to be done so that the security password will be learned by the replacement ECM. To avoid any inconvenience it is best to do this procedure at the time that you install the replacement ECM. This requires a programming tool (J2534 interface tool or equivalent) and a subscription to acdelcotds.com (cost to program one vehicle is $40.00) A properly equipped auto repair shop, dealer or locksmith can do this procedure. A crankshaft variation relearn will need to be performed once the vehicle isrunning. This will be evident if the check engine or service engine soon light comes on once the vehicle is running. You will need access to a scan tool capable of doing this procedure to do this and clear any related trouble codes (Code P0315). If this is not available to you a repair shop will have to perform this and clear the related trouble code. The vehicle will run normal but the ”service engine soon” light may come on and a trouble code will be stored until this is resolved. We will ship within one business day of payment. Same day shipping if ordered by 2:00 P.M. EST (Mon-Fri)

Hummer H3 2006 Engine Computer ECM PCM 12597521 – Programmed to your VIN #

This auction is for one 12597521 PCM (also known as Engine Computer, Powertrain Control Module, ECM, ECU, and VCM) that will arrive at your door ready to install with the proper calibration programmed to your specific vehicle. This PCM will fit the following applications: 2006 HUMMER H3 3.5L AUTOMATIC TRANS 4WD ( 4X4 ) 2006 HUMMER H3 3.5L AUTOMATIC TRANS 2WD ( 4X2 ) 2006 HUMMER H3 3.5L MANUAL TRANS 4WD ( 4X4 ) 2006 HUMMER H3 3.5L MANUAL TRANS 2WD ( 4X2 ) **GM used the same computer for the 2wd and 4wd automatic and 2wd and 4wd manual transmission applications. The difference between all of them is the programming in the computer to make them fit the correct application. With your purchase we will program the computer to your 17 digit VIN for an exact vehicle match so that the computer is ready to install when you receive it. ******If this is not the computer you are looking for please visit our e-bay store for more pcm’s. *Programmed to your specific vehicle *Shipped to your door ready to install *1 YEAR Replacement Guarantee – no hassle *No core charge –you keep your existing PCM- no extra trips to the post office *We ship the same day or the following business day from receipt of payment and your 17 digit VIN number – item is in stock and ready to ship. *********You can send us your 17 digit VIN(vehicle identification number) at the time of payment in the “note to seller” area or you can send your VIN through the ebay message center after your purchase. ******GM installed this 12597521 PCM in all of the above applications. This was possible because each of these models received their specific programming from the factory. In other words, you can’t simply swap a used PCM from one vehicle to the next. We are a licensed user of the same software that your local dealer would use to program and update your computer. With your purchase, we will program the PCM to your VIN (vehicle identification number) with the latest software updates available from GM. ******This PCM is used and was removed from a running salvaged vehicle. This PCM comes with a 1-year replacement guarantee. We have been in the PCM business for 17+ years. We are also a 17+ year eBay member with an Excellent positive feedback score. Other info: Why buy your spare PCM from us? You will be purchasing a high quality used PCM. You get free Flash programming with every OBDII GM computer purchased. OBDII type computers have the “chip” embedded into the PCM and it is not removable. The calibration file per the application is “Flashed,” or reprogrammed using a software package and a pass through device. The “chip” is no longer removed for programming. Proper programming is essential when replacing a PCM whether it is a used PCM or a remanufactured PCM. A used GM computer will have the software installed that pertains to the original vehicle that it was removed from. In some cases, GM OBDII type computers will interchange with many different vehicles including those with different engine and transmission configurations. However, unless the computer is programmed with the correct software it won’t function properly upon installation. We will flash program the computer purchased from us with your specific VIN number for the latest updated calibrations available for a stock calibration. This is important to ensure specific vehicle programming and to guarantee flawless performance in your vehicle. At the end of the auction you will need to provide us with your VIN (Vehicle Identification Number). THIS COMPUTER IS ALSO A DIRECT INTERCHANGE FOR THE FOLLOWING SERVICE NUMBER 12569773 ******View our e-bay store for more pcm’s. After purchasing, pay instantly with your credit card through PayPal!